EnGenius EAP300 - Page 57

56
8 Management
8.1 Administration
This page allows you to change the EAP300 username and password. By default, the user name is admin and the password
is: admin. Password can contain 0 to 12 alphanumeric characters and is case sensitive.
Login Setting
New Name Enter a new username for logging in to the Web Configurator.
New Password Enter a new password for logging in to the Web Configurator.
Confirm Password Re-enter the new password for confirmation.
Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
Logout Click Logout to logout.