74
Diagnostics
Target IP Enter the IP address you would like to search.
Ping Packet Size Enter the packet size of each ping.
Number of Pings Enter the number of times you want to ping.
Start Ping Click Start Ping to begin pinging target device (via IP).
Traceroute Target Enter an IP address or domain name you want to trace.
Start Traceroute Click Start Traceroute to begin the trace route operation.
Target Address Enter the IP address of the target PC.
Time period Enter time period for the speed test.
Check Interval Enter the interval for the speed test.
Start Speed Test Click Start Speed Test to begin the speed test operation.
IPv4 / IPv6 Port EAP300 use IPv4 port 5001 and IPv6 port 5002 for the speed test.
Please run iperf server (iperf -s) in the target PC.
To Next Page
Loading...
