the better the transmission quality and speed.
Select the channel and frequency appropriate.
Check this option to enable auto-channel selection.
Threshold packet size for RTC/CTS. A small number causes RTS/CTS packet to be sent more
often and consumes more bandwidth.
Limit the total number of clients, maximum 127 clients per radio.
Merges data packets into one aggregated packet. This helps transmission efficiency in a low
interference environment. In a high interference environment, suggest lower packet frames and
bytes.
AP Detection can select the best channel to use by scanning nearby areas for Access Points.
Configure up to eight different SSIDs (four in WDS AP mode). If many client devices will be
accessing the network, you can arrange the devices into SSID groups. Click Edit to configure the
profile and check whether you want to enable extra SSID.
Click Save to confirm the changes.
Note: Only support four SSID in WDS AP mode.
To Next Page
Loading...
