20
4 Building a Wireless Network
The ECB150 has the ability to operate in various operating modes. The ECB150 is the ideal device in which you can build
your WLAN. This chapter describes how to build a WLAN around your ECB150 using the operating modes of the ECB150.
4.1 Client Bridge Mode
In Client Bridge Mode, the ECB150 acts as a wireless dongle that connects to an Access Point to allow a system wireless
access to the network. This mode requires you to connect the Ethernet port on your PC to the ECB150 LAN port.
If you use the client bridge operating mode, use the ECB150 Site Survey feature to scan for Access Points within range.
When you find an Access Point, configure the ECB150 to use the same SSID and Security Password as the Access Point to
associate with it.
To Next Page
Loading...
