41
Access Point / Router mode:
Basic (Access Point / Router mode)
Radio Enable or Disable the ECB150’s wireless signal.
Mode Select between Access Point or Wireless Distribution System (WDS) modes.
Band Select the types of wireless clients that the device will accept.
Enable SSID# Select the number of SSID’s (Wireless Network names) you would like (up to 4).
SSID# Enter the name of your wireless network. You can use up to 32 characters.
Auto Channel When enabled, the device will scan the wireless signals around your area and select the channel
with the least interference.
Channel Manually select which channel the wireless signal will use.
To Next Page
Loading...
