EnGenius ENH220EXT - Client Bridge Mode

23
Client Bridge Mode
The ENH220EXT essentially acts as a wireless adapter that connects to an access point to allow a system of wireless
access to the network in the Client Bridge mode. Since the computers are on the same subnet, the ENH220EXT can
broadcast to reach all end-devices.
If you use the client bridge mode for the ENH220EXT, you can use the AP Detection feature to scan for Access Points
withinrange.WhenyoundanAccessPoint,conguretheENH220EXTtousethesameSSIDandSecurityPasswordas
the Access Point to associate with it.