EnGenius ENH220EXT - Mounting the ENH220 EXT

15
Mounting the ENH220EXT
Using the included accessories, the ENH220EXT can be attached to a wall or a pole.
1. Wall Mount Kit: 260x180x7(mm)
(10.2"x7.09"x0.28")
2. Pole Mount Kit 140x112x33(mm)
(5.51"x4.41"x1.30")
3.Pipe63.5(D)x12.7(mm)
(2.5"(D)x0.5")
4. Tool20(D)x6(mm)
(0.79"(D)x0.24")
5. Screws:6.5(D)x9.95(mm)
(0.26"(D)x0.39")