View or Change Wi-Fi Settings
When the IQ Gateway is using Wi-Fi to connect with
Enphase Installer App, select
>
to view Wi-Fi configuration
information. From here
you view Available Networks (WPS
and AP), Update Country,
Enable AP Mode
, and view
Device information.
If you replace the broadband router at the installation site,
you
need to update the connection information on the IQ
Gateway. To
do this:
•
Select Connect Other Network.
•
Enter the new Wireless Network Name (ESSID) and
Security code.
If you need to disconnect the IQ Gateway from a Wi-Fi network:
•
Select More Info.
•
Click Forget this Network.
To Next Page
Loading...
