Enterasys C2RPS-SYS - Using the Securestack C2 Manual Set

Using the SecureStack C2 Manual Set
xii About this Guide
Using the SecureStack C2 Manual Set
OthermanualshavebeendevelopedfortheSecureStackC2non‐PoEswitchdevicesthat
canbeconnectedtotheRPSforpowerredundancy.
TheSecureStackC2switchmanualsexplainhowtoinstalltheswitchdevice,connect
networkcable segmentstotheSecureStackswitchdevice,andconfiguretheswitchdevice
usingthe
commandlineinterfacecommandsdescribedintheSecureStackC2Configuraton
Guide.
Eachmanualiswrittenforqualifiedpersonnelwhoareresponsibleforinstallingthe
switchdeviceandalsohaveageneralworkingknowledgeofdatacommunications
networksandtheirphysicallayercomponents.
Caution: The RPS does not support PoE-compliant SecureStack switches. Do not try to
connect the power cable from this RPS to any SecureStack switch with a “P” suffix in the
model name, such as C2xxxxx-xxP. Otherwise, damage to the device may result.
Precaución: El RPS no es compatible con switches SecureStack C2 con PoE. No intente
conectar el cable de corriente del RPS a ningún switch SecureStack C2 que tenga el sufijo
“P” en el nombre del modelo, tal como C2xxxxx-xxP. De lo contrario, el dispositivo puede
dañarse.
Note: Connection of the RPS system does not require the reconfiguration of the
connected Ethernet Switch.