Enterasys WS-AP3710i User Manual

1-2 WS-AP3710 Overview
WS-AP3705i. Table 1-1 shows the comparative differences between the WS-AP3710 and
WS-AP3725 models.
WS-AP3710 Overview
The WS-AP3710 access point is available in two models:
• WS-AP3710i contains six internal single-band antennas
• WS-AP3710e contains six external RSMA connectors for optional external antennas, for
greater range and coverage versatility
Figure 1-1 on page 1-3 shows the front view of the WS-AP3710i and Figure 1-2 on page 1-4 shows
the front view of the WS-AP3710e. Both figures also show the location of the LAN port, console
port, and external power supply connector.
Figure 1-3 on page 1-5 shows the back view of the WS-AP3710. Although the figure shows the
WS-AP3710e model, the back panel is the same for both models.
Figure 1-4 on page 1-6 illustrates the WS-AP3710 LEDs.
Table 1-1 WS-AP3710 and WS-AP3725 Differences
Feature WS-AP3710 WS-AP3725
Radios 2 3, including additional 2.4GHz/5GHz
radio (Radio 3) that operates as a sensor
radio
LEDs 4 6
1 Ghz Ethernet
Port
12
Power <12.9W;
802.3af
<24W;
802.3at
Antennas WS-AP3710i has 6 internal single-band
antennas
WS-AP3710e has 6 external RSMA
connectors
WS-AP3725i has 8 internal antennas (6
single-band ; 2 dual-band)
WS-AP3725e has 6 external RSMA
connectors
DRAFT

Enterasys WS-AP3710i Specifications

General

Brand	Enterasys
Model	WS-AP3710i
Category	Wireless Access Point
Language	English