Enterasys Wireless AP3710/AP3725 Installation Guide 2-1
2
Installation
This chapter provides installation instructions for the Enterasys Wireless WS-AP3710 and
WS-AP3725 access points and the optional AP power supply.
Unpacking the WS-AP3710 and WS-AP3725
To unpack the access point:
1. Open the box and remove the packing material protecting the AP.
2. Verify that the carton contains the items listed in Table 2-1.
3. Perform a visual inspection of the AP for any signs of physical damage. Contact Enterasys
Networks if there are any signs of damage. Refer to “Getting Help” on page xi for details.
Accessories
The following accessories are available for the Enterasys Wireless AP3710/AP3725. For ordering
information, contact your Enterasys sales representative.
• 48V DC power supply, part number WS-AP3X48-MR
• Ceiling T-bar rail mount kit, part number WS-MB3700-01
For information about... Refer to page...
Unpacking the WS-AP3710 and WS-AP3725 2-1
Accessories 2-1
Access Point Installation Procedures 2-2
Table 2-1 AP3710/AP3725 Package Contents
Quantity Item
1 AP3710/AP3725
1 Mounting Bracket with screw
1 Quick Reference card
To Next Page
Loading...
Need help?
General
