Enterasys Wireless WS-AP3710 and WS-AP3725
Enterasys Wireless AP3710/AP3725 Installation Guide B-9
Certifications of Other Countries
The Enterasys Wireless AP3710/AP3725 has been certified for use in various other countries. Once
the correct country code is selected, the Wireless AP automatically uses the proper frequencies
and power outputs for that country code.
It is the responsibility of the end user to select the proper country code for the country within
which the device will be operated, or run the risk violating local laws and regulations.
.Other Country Specific Compliance Standards, Approvals and Declarations
• IEC 60950-1 CB Scheme + National Deviations
• AS/NZS 60950.1 (Safety)
• AS/NZS 3548 (Emissions via EU standards – ACMA)
• AS/NZS 4288 (Radio via EU standards)
• EN 300 328 (2.4 GHz)
• EN 301 893 (5 GHz)
• EN 301 489-1 & -17 (RLAN)
• IEEE 802.11a (5 GHz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.11n
• IEEE 802.3af (PoE)
RF Safety Distance
The antennas used for this transmitter must be installed to provide a separation distance of at least
25 cm from all persons and must not be co-located or operating in conjunction with another
antenna or transmitter.
To Next Page
Loading...
Need help?
General
