Enttec Din Pixie - Revision History; Package Contents; Ordering Information

DIN PIXIE (73539)
Visit the ENTTEC website for the latest version.
..

USER MANUAL
15 |
ID: 5935565
Document Updated: Nov 2023
Revision History
Please verify your device's serial number and artwork to ensure proper support:
◼ For DIN PIXIE Revision A (SKU: 73539) with a serial number prior to 2358764, kindly update the
firmware up to version 1.2. Note that new firmware versions are not backward compatible with
DIN PIXIE Rev A.
◼ For DIN PIXIE Revision B (SKU: 73539) that is released after serial number 2358765, ensure it is
loaded with firmware version 2.0 upward. Additionally, it is required to download and update
EMU version 23.10.17.8 at least.
Make sure to follow the appropriate instructions for your specific DIN PIXIE version to ensure that
the firmware is up-to-date and compatible.
Package Contents
◼ DIN PIXIE
◼ DIN mounting clip + screws
◼ USB Type A -> USB 2.0 Type B cable
Ordering Information
For further support and to browse ENTTEC’s range of products visit the ENTTEC website.
Item
Part No.
DIN PIXIE Rev B
73539
Due to constant innovation, information within this document is subject to change.