P a g e | 103
14) Once the GPS location or Barcode has been recorded then a comment will appear at the
top of the screen “Site/ID marked by GPS” or “Site/ID marked by Barcode”. If the location
failed to mark, then the message will read “GPS data not valid” or “Failed to find
Barcode”.
15) The new ID is now updated and located on the handheld computer.
6.9.1.3 Edit Well Information
The Wellhead Type, Pipe, and Plate sizes may also be changed for any existing ID. Simply select the ID
and choose the corresponding parameters. Be sure to hit “Save Changes” when complete.
6.9.1.4 Delete Site
Note: In later versions of the gas analyzer software, the “Clear Site” button has been removed to
protect the user from inadvertently deleting all wells associated with a certain site. The site may still be
cleared using the Configuration Editor software.
The software on the handheld computer will let the user delete a site from the configuration file loaded
on the handheld computer. Deleting the site will NOT delete any data stored in the field (.csv) data
files. CAUTION: Deleting a site will also delete all the wells associated with it.
To Next Page
Loading...