P a g e | 13
5.2 Turning off the Trimble Handheld Computer
1) Press the green power button for two seconds
2) Tap the shutdown button on the touch screen
3) Tap yes on the popup screen if you agree with the warning message
5.3 Backlight and Power Settings
Elkins Earthworks® has already adjusted your Trimble handheld computer for the following backlight
and power settings:
* If the user changes the backlight setting the Envision® will lose Bluetooth connection when the unit
enters and recovers from the backlight being powered on and off. The unit will regain Bluetooth
connection almost instantly.
** Hibernation mode will cause the Envision® to lose connection and will need to be reconnected once
the Nomad is turned back on. Elkins Earthworks® recommends that these settings remain as set upon
delivery.
To Next Page
Loading...