P a g e | 30
6) If the user name and time are now correct, then tap the “Login” button at the bottom of the
screen.
6.3 Connecting and Disconnecting the Envision® Gas Analyzer
6.3.1 Connecting to the Envision® Gas Analyzer
The user can connect to the Envision® gas analyzer in one of two ways, by Bluetooth or serial
connection.
6.3.2 Bluetooth Connection
Once the user is logged in, the user can now search for and connect to an Envision® gas analyzer.
1) On the handheld computer make sure that the “Select Meter” screen is displayed
2) Turn on the Envision® gas analyzer by pressing the power button on the front of the Envision® gas
analyzer
3) The Envision® gas analyzer will maintain a solid green light next to the power button
4) Next press the Bluetooth® button on the face of the Envision® gas analyzer. The blue light on the
Envision® gas analyzer will blink now that it is discoverable and can allow the handheld computer
to find it.
To Next Page
Loading...