P a g e | 27
1) Select the Desired ID set and the name of the Technician who will be using the Envision® gas
analyzer from the drop down menu located at the center of the “Login Menu” screen. ID sets
may be added to this drop down menu by utilizing the “Elkins Earthworks® Configuration Editor”
software that may be installed on your personal computer. The “Elkins Earthworks®
Configuration Editor” software is provided on the Elkins Earthworks® software Flash drive
included in the original packaging of the Envision® gas analyzer. Both ID sets and technician
names may also be added directly from the drop down list on the Login Menu. When adding a
new ID set, the user may be prompted to choose either English or Metric units of measurement.
To Next Page
Loading...