ep EPT20-ET2 - Transport and Commissiong; Truck Transport

REV. 09/2022
A8
REV. 09/2022
A9
1.4 Transport and commissiong
1.4.1 Truck transport
•The load weight includes the net weight
of the truck(including battery weight) and
the wooden pallet.
•The pallet or wooden box should be
large and strong enough to withstand the
weightof the truck.
• Pay attention to the fork blades when
lifting the truck onto the pallet, to prevent
injuries caused by the forks.
Follow the prescribed steps and park the
vehicle correctly.
Make sure the forks are aligned with
the pallet, move slowly and stop after
inserting the forks as far into the
pallet as possible.
Operate on open, level ground and pay
attention to ground conditions when lifting
and lowering the pallet to prevent the
truck from tipping.
When transporting the truck, make sure
it is fully secured and take precautionary
measures against bad weather.
•Place the truck on a wooden pallet.
Only use haulage equipment with
sufficient load capacity.
CAUTION
i
NOTE
•Fix the truck to the pallet to prevent
loosening.
1.4.2 Hoisting
Personnel must not stand below or near the truck when the pallet truck is being lifted.
Only use lifting gear with sucient capacity (for truck weight see truck nameplate ).
When hoisting or laying down, it should be stable and slow to avoid collision or
accident.
DANGER
Park the truck securely as described chapter B Section1.2.6
Secure the lifting slings to the strap point, and prevent them from slipping. Crane slings
should be fastened in such a way that they do not come into contact with any attachments
when lifting.
Load the truck and park it securely at its destination.