REV. 09/2022
B10
REV. 09/2022
B11
1.2.7 Drive directions
The drive directions of the truck are forward (1)
and reverse (2).
1
2
1.2.8 Loading
•Approach the load carefully.
•Adjust the height of the forks until they
can be easily inserted into the pallet.
•Insert the forks under the load.
•If the load is shorter than the forks,
position the forks so that the front of
the load overhangs them by a few
centimeters, to avoid interference with
the load immediately ahead.
•Raise the load a few centimeters above
its support.
•Drive the truck away from the stack or
any neighbouring loads, gently and in a
straight line.
Transporting loads
Always carry loads in the forward
direction of travel (R) in order to have
the best visibility.
R
F
WARNING
When carrying a load on a slope, always
ascend or descend with the load uphill.
Never drive sideways across a slope or
perform a U-turn.
1.2.6 Parking the truck securely
Lower the forks to the bottom;
Turn o the key switch or pull out the key;
Press the emergency stop switch to cut o
storage battery connection;
•Should it be necessary for operators to
leave the truck, even for just a moment,
the truck should also be well parked as
specified.
•Never park the truck on a slope;
•The forks must be lowered to the bottom.
WARNING
To Next Page
Loading...
