REV. 09/2022
D4
REV. 09/2022
D5
The truck may only be recommissioned after cleaning or repair work, once the following
operations have been performed.
Test horn.
Test emergency brake switch.
Test brake.
Lubricate the truck in accordance with the maintenance point.
Do follow the daily checklist.
•
•
•
•
•
Final, proper decommissioning or disposal of the truck must be performed in accordance
with the regulations of the country of application. In particular, regulations governing the
disposal of batteries, fuels, Hydraulic oil, plastic and electronic and electrical systems must
be observed.
The quality of tyres aects the stability and performance of the truck. When replacing
tyres tted at the factory, only use the manufacturer’s original spare parts. Otherwise the
data sheet specications of the truck cannot be guaranteed. When changing wheels and
tyres, ensure that the truck does not slew (e.g. when replacing wheels always left and right
simultaneously).
Only original tires have been certified by our quality assurance service. To ensure safe and
reliable operation of the fork truck, only tires of the manufacturer must be used.
WARNING
1.2.2 Recomissioning
• Prepare the truck for maintenance and repairs.
• Check condition and rating of the fuses in accordance with your parts manual or service
manual.
1.2.4 Tire replacement
1.2.3 Final decommissioning, disposal
1.2.1 Check the electrical fuses
Table 1 Lubricants
Code Type Specication Amount Position
A
Anti-wear hydraulic oil L-HM32 0.48 L
Hydraulic
System
C
Grease 3#(MoS
2
) - 110 grams Gearbox
Add hydraulic oil till you can't hear explosion sound during lifting any more.
NOTE
Hydraulic oil
injection nozzle
Geat oil
injection nozzle
2000-hour/12-month maintenance
After operating for 2000 hours in total, the truck should also be maintained according to the
following procedures in addition to the 50-hour maintenance,250-hour maintenance, 500-hour
maintenance and 1000-hour maintenance mentioned above
25L Clean the oil tank and replace the hydraulic oil