Epever DR3210N-DDS - Page 13

9
No.
Interface
Instructions

Input terminal
Connect to the controller's AES Sig.
terminal and the BATT1 output terminal

Output terminal
Connect to the refrigerator's AES signal
terminal

Power indicator
Indicate BATT1 power ON

AES signal indicator
Light on with an AES signal
Light off without an ASE signal
 Main Parameters
Applicable
DR1206/2206/3206/2210/3210N-DDB/DDS
Input Voltage
8.5V-35V
Output Voltage
12V/200mA
Self-consumption
1mA@12V; 1.5mA@24V
Environment
temperature
-30℃ ~ +60℃
Features
Support output short-circuit, BATT1 input terminal reversed
polarity, and AES signal reversed connection



