Microphone of the connected Bluetooth device is muted
Overview of the dongle button
Link button Press Function Page
3s
Pairs the dongle with the headset 7
Reconnects the headset 21
2x
Disconnects the headset 21
Overview of the icons
Tap the button
i
Notes: Good to know
2x
Press the button twice LED indications
3s
Press and hold the button Voice prompt is announced
ADAPT 360 | ADAPT 360 White Bluetooth
®
headset
Getting started7
Getting started
Pairing the headset with Bluetooth
®
devices
CAUTION
Danger of malfunction!
The transmitted radio waves of mobile devices can impair the operation of sensitive and unprotected devices.
X Only use Bluetooth where it is permitted.
The headset complies with the Bluetooth 5.0 standard. Bluetooth devices need to support the “Hands-Free Prole”
(HFP), the “Headset Prole” (HSP), “Audio Video Remote Control Prole” (AVRCP) or the “Advanced Audio Distribution
Prole” (A2DP).
To transmit data via Bluetooth, you rst have to pair your
headset to a wireless device. The delivered dongle is
already paired with the headset.
The headset can save up to eight paired devices. If you
pair the headset with a ninth device, the device with the
oldest activity in the pairing list will be overwritten. If you
want to re-establish a connection with this device, you
have to pair it again.
The headset can be connected to two of the paired
devices at the same time. You can only connect another
device by disconnecting one of the already connected
devices.
Connecting the headset via the dongle
USB-A
USB-C
To connect the headset wirelessly with a computer, use the
BTD 800 USB or BTD 800 USB-C dongle.
The dongle and the headset in the bundles are already
paired.
X Turn the headset on (see page 10).
X Plug the dongle into the USB port of your computer.
The dongle LED flashes blue while searching and switches
to dimmed blue when connected successfully to the
headset.
If Microsoft Teams is invoked: The dongle connects to
Teams and lights up purple instead of blue.
The dongle shows Teams notifications (see page 17).
i
To manually pair the headset and the dongle, activate the pairing mode for both:
X Press and hold the headset’s Power button and the dongle’s button until the LEDs alternately ashes blue
and red. Once the dongle and the headset are connected, the dongle lights up dimmed blue.
To Next Page
Loading...
Need help?
General
