EPOS ADAPT 360 User Manual

ADAPT 360 | ADAPT 360 White Bluetooth
®
headset
Getting started8
Pairing the headset via Bluetooth with a mobile device
4s
1 2
X Press and hold the Power button until the LED ashes
blue and red.
The headset is in pairing mode.
X Enable Bluetooth on your mobile device and start the
search for Bluetooth devices – see instruction manual of
your mobile device.
...
...
EPOS ADAPT 360
...
3
< 20 cm
4
2x
X Select “EPOS ADAPT 360” to establish a Bluetooth
connection to the headset.
The LED flashes 2 times blue as soon as the headset finds
a device to connect to. The LED turns off.
i
To cancel pairing:
X Press the Power button.
ADAPT 360 | ADAPT 360 White Bluetooth
®
headset
Getting started9
Installing the EPOS Connect software
www.eposaudio.com/connect
EPOS Connect
x
EPOS Connect
The free EPOS Connect software allows you to configure
and update your headset and offers additional settings.
X Download the software from
www.eposaudio.com/connect.
X Install the software.
You need administrator rights on your computer – if
necessary, contact your IT department.
To make calls via the computer:
X Install a softphone (VoIP Software) or ask your admin for
support.
Changing Audio settings for the headset – Microsoft
®
Windows
x
Audio settings
ADAPT
ADAPT
Windows usually changes the Audio settings automatically
if you connect a new headset.
If the headset is connected but you hear no sound:
X Right-click the Audio icon.
X Select under output ADAPT 360 as speaker.
X Select under input ADAPT 360 as microphone.

EPOS ADAPT 360 Specifications

General

Connectivity	Bluetooth 5.0, USB-C
Active Noise Cancellation	Yes
Frequency Response	20 Hz - 20 kHz
Wearing Style	Over-ear
Water Resistance	No
Charging Time	2 hours
Compatibility	PC, Mac, Mobile