Default settings
The table below shows the default conditions that take effect
when the printer is initialized.
Item
Top-of-form position
Page length
Left and right margins
Line spacing
Character pitch
Vertical tab position
Horizontal tab positions
Font selection
Special printing effects
User-defined character set
Default condition
Current paper position
The current DIP-switch setting
Canceled
1/6 inch
10 cpi or condensed (depending on
contral panel selection)
Cleared
Every eight characters
Last font selected on control panel
Canceled (except condensed printing)
Hardware: cleared
Software/control panel: deselected only
In addition, hardware and control panel initialization erase
any text in the data buffer.
Technical Specifications
7-17
To Next Page
Loading...
