Unpacking the Printer
Checking the parts
When you unpack the printer, make sure you have all the parts
shown below and that none is damaged.
Printer
Power cord
Ribbon cartridge
Note:
In some locations the power cord may be attached to the printer.
Store the packing materials in case you ever need to transport
your printer.
Caution:
There are several versions of the printer designed for different
voltages, and it is not possible to adjust the printer for use at
another voltage. If the label on the back of the printer does not
show the correct voltage for your country, contact your dealer.
1-2 Setting Up the Printer
To Next Page
Loading...
