#"$
12# .
To avoid most paper handling problems:
◗ Use smooth, high-quality media designed for ink jet printers that meets
the media specifications in Paper
.
◗ Follow all loading and handling instructions included with the media.
◗ Load the media with the printable side face up as described in the
Start
Here
card and in Paper Loading and Handling Guidelines.
If you have any paper problems, check the following tables for solutions.
Paper doesn’t feed
Try this Then do this
Remove the stack of
paper from the printer.
Check that the paper isn’t:
◗ Curled or creased.
◗ Too old. (See Paper Loading and Handling Guidelines
or your
paper packaging for more information.)
◗ Loaded above the arrow on the left edge guide.
◗ Jammed inside the printer. (If the
S paper out light is flashing,
paper is jammed.)
Then reload the paper against the right edge guide and adjust the left
edge guide to fit the paper’s width, as described in the
Start Here
card
and in Paper Loading and Handling Guidelines.
To Next Page
Loading...
Need help?
General