Epson AM-C6000 Series - Page 109

1. Access Web Cong, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3.
Enter a password to encrypt the exported le.
You need the password to import the le. Do not enter any characters if you do not want to encrypt the le.
4. Click Export.
c
Important:
If you want to export the printer’s network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
printer.
Related Information
& “Accessing Web Cong” on page 9
Import the settings
Import the exported Web Cong le to the printer.
c
Important:
O e exported Web Cong le does not contain the license key. If Epson Print Admin Serverless is disabled, select
the Epson Open Platform tab > Product Key or License Key, and then enter the license key before importing to
enable Epson Print Admin Serverless.
O When importing values that include individual information such as a printer name or IP address, make sure the
same IP address does not exist on the same network. If the IP address overlaps, the printer does not reect the
value.
1. Access Web Cong, and then select the Epson Open Platform tab > Product Key or License Key, and then
enter the license key in Product Key or License Key.
2. Select the Device Management tab > Export and Import Setting Value > Import.
3. Select the exported le, and then enter the encrypted password.
4.
Click Next.
5. Select the settings that you want to import, and then click Next.
6. Click OK.
e settings are applied to the printer.
Setup & Administration Guide
Operation and Management
109