Epson AM-C6000 Series - Synchronizing with the LDAP Server (Web Config)

Search Setting Items for Microsoft Entra ID Authentication (Web
Cong
)
Item Settings and Explanation
User ID Attribute Specify the attribute name to be used when searching for a user ID. Enter a
combination of between 1 and 255 characters using A-Z, a-z, 0-9, hyphens (-), and
semicolons (;). The
rst
character should be a-z or A-Z.
Example: employeeId
User name Display Attribute Specify the attribute name to be used when searching for a user display name.
Enter a combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens
(-), and semicolons (;). The rst character should be a-z or A-Z.
Example: displayName
Authentication Card ID Attribute Specify the attribute name to be used when searching for an authentication card
ID. Enter a combination of between 0 and 255 characters using A-Z, a-z, 0-9,
hyphens (-), and semicolons (;). The rst character should be a-z or A-Z.
Example: employeeId
ID Number Attribute Specify the attribute name to be used when searching for an ID number. Enter a
combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens (-), and
semicolons (;). The
rst
character should be a-z or A-Z.
Example: employeeId
Department Attribute Specify the attribute name to be used when searching for a department name.
Enter a combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens
(-), and semicolons (;). The
rst
character should be a-z or A-Z.
Example: department
Email Address Attribute Specify the attribute name to be used when searching for an email address. Enter
a combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens (-),
and semicolons (;). The rst character should be a-z or A-Z.
Example: mail
Synchronizing with the LDAP Server (Web Cong)
Make the LDAP server settings for the printer using Web
Cong
.
Set this when you select Remote DB or Local DB and Remote DB as the Authentication Method and LDAP is
selected as the Remote DB.
For details of setting items, see the same item for Epson Device Admin in this manual.
Related Information
& “LDAP Server Setting Items” on page 74
& “Kerberos Setting Items” on page 75
& “Search Setting Items for LDAP Server Authentication” on page 76
Making the LDAP Server Setting (Web Cong)
1. Select the Epson Print Admin Serverless Setting List > LDAP Server > Basic (Primary Server).
Or access Network tab > LDAP Server > Basic (Primary Server).
Setup & Administration Guide
Information Registration and System Conguration
46