Epson AM-C6000 Series - Operation Flow of Epson Device Admin

Related Information
& “Required Settings for the Authentication Method” on page 12
Operation Flow of Epson Device Admin
Make the Epson Print Admin Serverless settings by using the conguration template for Epson Device Admin.
Apply the setting value to the printer by following the ow below.
1. Create the conguration template.
2. On the setting item screen, enter or select the value, and enable the item that you want to apply.
e following is an example.
3. Save the conguration template.
4. Select the printer you want to apply the setting value, and apply the conguration template.
Setup & Administration Guide
Information Registration and System Conguration
60