Epson AM-C6000 Series - Operation and Management; User Reports Using Epson Device Admin; Creating User Reports

Operation and Management
User Reports Using Epson Device Admin
You can create an Epson Print Admin Serverless report for each group and each user by using Epson Device
Admin. You can create the report by specifying a period or setting a regular schedule. Create device groups before
creating reports.
ese settings are displayed when you enable the Epson Print Admin Serverless / Authentication Settings menu.
c
Important:
If you have not registered the printer's administrator password in Epson Device Admin, you cannot acquire job
histories from the printer.
Register the printer's administrator password in advance. See the following for the registration procedure.
“Registering the printer's administrator password in Epson Device Admin” on page 11
Related Information
& “Displaying Epson Print Admin Serverless / Authentication Settings menu” on page 102
Creating User Reports
1. Select Reports on the side bar task menu.
2. Select User Dened Report > Scheduled Reports from the tree view.
3.
Click New on the ribbon menu.
e report creation Wizard is displayed.
Setup & Administration Guide
Operation and Management
96