Epson AM-C6000 Series - Required Settings for the Authentication Method

1. Start Epson Device Admin.
2. Select Devices on the side bar task menu.
3. Select Options > Password manager.
4. Select Enable automatic password management and then click Password manager.
5. Select the target printer, and then click Edit.
6. Set the password, and then click OK.
Required Settings for the Authentication Method
Depending on the authentication method you use, the required settings dier. Set up the printer by referring
below.
Settings Local DB Remote DB Local DB and
Remote DB
Registering the license key
✓✓✓
Connecting and setting the authentication
device
✓
*1
✓
*1
✓
*1
User authentication setting
✓✓✓
Print job setting
✓✓✓
Access control setting
✓✓✓
Available function setting using without an
authentication
✓
*2
✓
*2
✓
*2
Settings for synchronizing with cloud directory
services
✓
*3
✓
*3
✓
*3
Microsoft Entra ID authentication setting -
✓
*4
✓
*4
LDAP server authentication setting -
✓
*5
✓
*5
User information registration
✓
-
✓
Mail server setting
✓
*6*7
✓
*6*7
✓
*6*7
Scan to My Folder setting
✓
*8
✓
*8
✓
*8
Pull Printing
✓
*9
✓
*9
✓
*9
Page count management setting
✓
*10
-
✓
*10
*1 : When Card or User ID and Password or Card or ID Number is selected as the authentication method.
*2 : When you use the standalone function without authentication.
*3 : When you use cloud directory services synchronization.
*4 : When you use Microsoft Entra ID authentication.
Setup & Administration Guide
Setting Overview
12