Epson AM-C6000 Series - Making Print Job Settings (Web Config)

c
Important:
Notes when using LDAP server authentication:
When using an additional network interface board, set the network interface used for LDAP server authentication.
e LDAP server can only be used with either the standard network interface or the additional network interface.
Settings > General Settings > Network Settings > LDAP Server
Related Information
& “Overview for the Authentication Method” on page 7
Checking the Tenant ID for Microsoft Entra
Access the Microso Entra admin center to check your tenant ID.
Follow the steps below.
Note:
e content of the Microso Entra admin center website is subject to change.
1. Access the Microso Entra admin center (https://entra.microso.com) using your organization account.
Access using an account that has global administrator role privileges.
2. Select Identity - Overview - Properties.
3. Scroll down to the Tenant ID section and check the tenant ID displayed.
Making Print Job Settings (Web Cong)
Make settings related to the print job sent from the client computer.
1. Select the Epson Print Admin Serverless Setting List > Epson Print Admin Serverless > Print Jobs.
Or access Epson Open Platform tab > Print Jobs.
2. Set each item.
3. Click OK.
Related Information
&
“Deleting the Print Jobs” on page 107
Print Jobs Setting Items
Item Explanation
Maximum time limit for
unreleased job (0 to 720 hours)
Set the time period to automatically delete all print jobs. When you set “0”, the print jobs
will not be deleted automatically.
Retain printed jobs Permit the users to retain the print jobs.
Setup & Administration Guide
Information Registration and System Conguration
34