Epson AM-C6000 Series - Applying the Configuration Template

2. Select the Product key / License key List.
If the Epson Open Platform Version is selected, deselect it.
3.
Click Import.
4. Select the CSV le for the license key and click Open.
e le
is read and the contents are displayed.
Note:
O When you select the printer on the list and click Delete, you can delete the license key from the list.
O When you click Import again, you can add the other CSV les.
5. Click Save.
6. Click OK.
7. Click OK on the completion screen.
Setting values are saved to the conguration template and then the screen is closed.
Note:
To open the conguration template again, select the saved template from the Conguration Template Name, and then
click Edit on the ribbon menu.
Applying the Conguration Template
Apply the saved
conguration
template to the printer.
e
items selected on the template are applied. If the target
printer does not have an applicable function, it is not applied.
If you have not registered the printer's administrator password in Epson Device Admin, register the password rst
before performing this operation.
“Registering the printer's administrator password in Epson Device Admin” on page 11
Setup & Administration Guide
Information Registration and System Conguration
28