Epson AM-C6000 Series - Flow to Set up Printers Individually

*5 : When you use LDAP server authentication.
*6 : When you use the notication email function.
*7 : When you use the Scan to My Email function.
*8 : When you use the Scan to My Folder function.
*9 : When you use the Pull Printing function.
*10 : When you use the Manage page count function.
Flow to Set Up Printers Individually
Explains the procedure to set up Epson Print Admin Serverless on an individual printer. When you use Web
Cong, you can set up the printer only by using a web browser.
c
Important:
Before starting the setup, check that the time setting for the printer is correct.
If the time setting is incorrect, the error message "License is expired" is displayed, which may lead to failure to set up
Epson Print Admin Serverless. Also, in order to use a security function such as SSL/ TLS communication or IPsec,
the correct time must be set. You can set the time as follows.
O Web Cong: Device Management tab > Date and Time > Date and Time
O Printer's control panel: Settings > General Settings > Basic Settings > Date/Time Settings
Procedure Operations Details
1Connecting the
authentication device
*1
Connecting the authentication device
to the printer and checking the
operation
Connect the authentication device to the
printer.
2 Date/Time setting Setting the date and time Set the correct date and time in the
printer.
3 Registering the license
key
*2
Entering the license key Activate Epson Print Admin Serverless to
the printer by using Web Cong.
Setup & Administration Guide
Setting Overview
13