Epson AM-C6000 Series - Connection Format for Authentication Information

& “Connect the printer by using IPP protocol” on page 95
Connect the printer by using Bonjour
1. Open System Preferences (or System Settings) > Printers & Scanners (or Print & Scan, Print & Fax).
2.
Click + (or Add Printer, Scanner or Fax).
When the menus are displayed, click Add Printer or Scanner.
3. Make sure you select Default, and then select the printer you want to use from Name.
4. Select Select Soware (or Select Printer Soware) from Use (or Print Using).
5. Select the printer you want to use on the Printer Soware screen, and then click OK.
6. Click Add.
Connect the printer by using IPP protocol
1. Open System Preferences (or System Settings) > Printers & Scanners (or Print & Scan, Print & Fax).
2. Click + (or Add Printer, Scanner or Fax).
When the menus are displayed, click Add Printer or Scanner.
3. Select IP.
4. Enter the printer's host name or IP address in Address.
5. Select IPP (Internet Printing Protocol) in Protocol.
6. Select Select
Soware
(or Select Printer
Soware
) from Use (or Print Using).
7. Select the printer you want to use on the Printer Soware screen, and then click OK.
8. Click Add.
Connection Format for Authentication Information
When printing jobs from the printer driver, authentication information is required for USB connections and
network connections. Print jobs without authentication information are discarded.
You can disable USB connections in the following way. In this situation, the print job is discarded.
O Web Cong:
Set PC connection via USB in Product Security > External Interface to Disable.
O Epson Device Admin (Conguration Templates):
Set USB Device Interface in Common > External Interface to Do Not Use.
Setup & Administration Guide
Client Computer Setting
95