Epson AM-C6000 Series - Page 47

2. Set each item.
See the related information for details of each item.
3. Click OK.
4.
When you select Kerberos Authentication for Authentication Method, make Kerberos settings from
Network tab > Kerberos Settings, and then click OK.
You can register up to 10 Kerberos settings. If you do not select it, go to the next step.
5. Set the secondary server for LDAP server as necessary on Basic (Secondary Server), and then click OK.
e setting items are same as the primary server settings.
6. Click OK.
Related Information
&
“LDAP Server Setting Items” on page 74
&
“Kerberos Setting Items” on page 75
Checking the LDAP Server Connection
Performs the connection test to the LDAP server by using the parameter set on LDAP Server > Search Settings.
1. Select the Epson Print Admin Serverless Setting List > LDAP Server > Connection Test (Primary Server).
Or access Network tab > LDAP Server > Connection Test (Primary Server).
2. Click Start.
e result is displayed.
3.
Click OK.
Making the Search Attribute Setting
Set the search attribute of the user to register to Epson Print Admin Serverless from the LDAP server.
1. Select the Epson Print Admin Serverless Setting List > LDAP Server > Search Settings (Epson Print Admin
Serverless).
Or access Network tab > LDAP Server > Search Settings (Epson Print Admin Serverless).
2. Set each item.
3. Click OK.
Related Information
& “Search Setting Items for LDAP Server Authentication” on page 76
Setup & Administration Guide
Information Registration and System Conguration
47