Epson AM-C6000 Series - Page 80

3. Select LDAP for Import Source.
4. Click Settings.
LDAP server setting is displayed.
Note:
is LDAP server setting is the setting to import the user information from the LDAP server to the printer. e
imported user information is used to authenticate users by the printer itself.
On the other hand, when you select Remote DB or Local DB and Remote DB for the authentication method,
communicate with the LDAP server to authenticate users.
5. Set each item.
When importing user information from an LDAP server, you can make the following settings in addition to
the items in the LDAP settings.
See related information for other items.
Items Description
LDAP Server Settings LDAP Server Type Select the type of LDAP server.
Setup & Administration Guide
Information Registration and System Conguration
80