Epson AM-C6000 Series - Page 90

Item Explanation
Operation if user page count insucient Select the operation to perform when the user runs out of printable pages
while printing a job.
O Restrict after job ended
Even if the number of printable pages reaches 0 or less while printing a
job, the job being printed is printed to the end. The next job to be
printed cannot be printed because a message is displayed on the
control panel informing the user that they do not have enough
printable pages remaining.
O End job
If the number of printable pages reaches 0 or less while printing a job,
printing stops and a message is displayed on the control panel
informing the user that they do not have enough printable pages
remaining. Any jobs that are canceled are not deleted, they are stored
in the print job list.
c
Important:
If the number of pages to be printed cannot be determined before
printing, printing may be performed even if the number of pages
that can be printed is exceeded.
e
number of pages cannot be determined in the following cases.
O Copying using ADF
Post-login page Select the screen that is displayed after you log in to the printer.
O List of print jobs
Displays the print job list. If Auto release jobs upon device login is
enabled in the user information settings, printing starts automatically
when the user logs in to the printer.
O Home screen
Displays the home screen.
Update schedule settings Set to periodically update the number of printable pages.
Set number of pages in batch Add the number of printable pages.
Setup & Administration Guide
Information Registration and System Conguration
90