EasyManuals Logo

Epson BrightLink 455Wi Installation Guide

Epson BrightLink 455Wi
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
7. Attaching the Covers
A Attach the wall plate cover and end cap
(1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolts (A).
(2) Place the end cap with the concave portion facing up (
B).
B Attach the cable cover to the projector
Attach the cable cover and tighten the two screws to secure the cable cover.
q
If the cables are not installed inside the wall, you need to pass them through the
cutouts on each side of the wall plate cover. You may need to enlarge the cutouts to
allow the cables to be passed through.
End cap
Wall plate cover
M4 x 12 mm
hexagon socket head
cap bolts (2)
Cable cutouts
Cable cover
Screws (2)
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to the User’s Guide of your projector for instructions on maintenance and repairs.

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals