Epson CW-C8000 Series - Page 16

Forms of paper Paper shapes Paper
width
(mm) {inch}
Backing
paper
width
(mm) {inch}
Label
width
(mm) {inch}
Gap
between
labels
(mm) {inch}
Continuous plain paper
with black marks
*2
Fanfold paper
50 to 112
{2.00 to 4.41}
--- --- ---
Continuous plain paper
without black marks
Roll paper
25.4 to 112
{1.00 to 4.41}
--- --- ---
Full-page label
with black marks
*2
Roll paper
---
25.4 to 112
{1.00 to 4.41}
21.4 to 108
{0.84 to 4.25}
---
Full-page label
without black marks
Roll paper
---
25.4 to 112
{1.00 to 4.41}
21.4 to 108
{0.84 to 4.25}
---
Tag*
3
(with hole, oblong hole,
cutout)
Roll paper
25.4 to 112
{1.00 to 4.41}
--- --- ---
Tag*
3
(with hole, oblong hole,
cutout)
Fanfold paper
50 to 112
{2.00 to 4.41}
--- --- ---
*1: The print position is detected based on the gaps between labels.
*2: The print position is detected based on the black marks printed on the back of the paper.
*3: The print position is detected based on the holes, oblong holes, and cutouts in the paper.
Note
❏ When labels less than 25.4 mm {1.00 in.} in length are cut automatically, the printed label may
adhere to the cutter blade and become dicult to remove.
❏ Depending on shape, thickness, and
stiness
of die-cut labels, the labels may peel
o
their
backing paper inside the printer. When you want to use die-cut labels that do not meet the paper
specications, contact qualied service personnel for advice.
CW-C8000 Series User's Guide
Before use
16