Epson CW-C8000 Series - Blurred Printing, Characters Look Doubled, Misalignment of Print Position; Paper Is Smeared or Smudged with Ink; Paper Is Fed and Ejected, and an Error Occurs; Paper Is Loaded, but Not Fed into the Printer

Blurred printing, Characters look doubled, Misalignment of print
position
Cause Solution and Reference
The edge guide is not set along the paper
edge.
Check that the edge guide is properly set at the paper width position.
U “Loading and Replacing Paper” on page 44
The ink droplets red at incorrect
positions in both the paper-feed and
paper-width directions.
Perform Adjust Uneven Colors. For more details, see the CW-C8000 Series
Technical Reference Guide.
The gap between the paper and the print
head is not appropriate.
Adjust Head-Media Clearance Height. For more details, see the CW-C8000
Series Technical Reference Guide.
Paper is Smeared or Smudged with Ink
Cause Solution and Reference
The paper may have rubbed against the
print head due to insucient suction on
the platen.
Adjust Media Hold Pressure. For more details, see the CW-C8000 Series
Technical Reference Guide.
The gap between the paper and the print
head is not appropriate.
Adjust Head-Media Clearance Height. For more details, see the CW-C8000
Series Technical Reference Guide.
Paper is Fed and Ejected, and an Error Occurs
Cause Solution and Reference
The paper being used diers from that of
Media detection settings.
Check the paper being used and Media detection settings of the printer.
U “Printer Driver Settings” on page 39
Paper is Loaded, but Not Fed into the Printer
Cause Solution and Reference
The sensors are not positioned correctly. Make sure that the adjustment knobs on the light-receiving and light-emitting
sensors are in the same position, and perform Adjust media detection sensor.
For more details, see the CW-C8000 Series Technical Reference Guide.
CW-C8000 Series User's Guide
Troubleshooting
76