Epson CW-C8000 Series - Media Definition; Media Name; Width; Length

Media
Denition
e size, form, type, and other settings of frequently used paper can be registered as a media denition. e set
media denition can be selected from the Media Name pull-down menu. is is convenient because you will not
need to set the paper settings of the driver when printing from an application if you register a media denition in
advance.
If you wish to set the paper size and other settings every time without registering a media denition, select Custom
from the Media Name pull-down menu on the General tab.
e
various settings on the General tab will become
available so that you can set the paper size and other settings.
Media Name
❏ Media Size Reduction
❏ 108 x 152.4 mm - Die-cut Label* (Initial setting)
❏ Custom
*: is setting is suitable for printing the roll paper included with the product.
Width
21.4 to 112.0 mm {0.84 to 4.41 in.}
Initial setting: 108.0 mm {4.25 in.} (Die-cut label/Full-page label/Continuous paper), 76.2 mm {3.00 in.} (Tag)
Length
When [Media Form] is set to [Full-page Label (no detection)] or [Continuous paper (no detection)]
Can be
specied
from 11.0 to 1016.0 mm {0.43 to 40.00 in.}
Initial setting: 152.4 mm {6.00 in.}
When [Media Form] is set to [Tag (hole detection)]
Can be specied from 8.0 to 300.0 mm {0.31 to 11.81 in.}
Initial setting: 50.8 mm {2.00 in.}
When [Media Form] is set to other than above
Can be specied from 8.0 to 1016.0 mm {0.31 to 40.00 in.}
Initial setting: 152.4 mm {6.00 in.}
Gap Between Labels
3.0 to 6.0 mm {0.12 to 0.24 in.}
CW-C8000 Series User's Guide
Basic Operation
40