Epson CW-C8000 Series - Cleaning the Auto Cutter

Cleaning the Auto Cutter
Watching the Video on How to Clean the Printer
https://support.epson.net/p_doc/95e/
U “Cleaning the Printer (CW-C8000 Series)”
If labels, paper dust, or adhesive has adhered to the xed blade of the auto cutter, the blade may become dull.
Clean the xed blade following the procedure below.
A
If paper has been loaded, remove it.
U “How to Remove Paper” on page 54
B
Turn the pr inter
o
and then disconnect the power cable from the outlet.
C
Using an alcohol-soaked cotton swab, remove labels, paper dust, and adhesive materials adhering to the
xed blade of the auto cutter from both ends toward the center, as shown in the gure below.
CW-C8000 Series User's Guide
Maintenance
59