Epson CW-C8000 Series - Replacing the Ink Packs; Checking Amount of Ink Remaining; How to Replace the Ink Packs

Replacing the Ink Packs
is section describes how to replace the ink packs.
!
Caution
Carefully read the cautions on handling before installing the ink packs.
U “Cautions on Ink Packs” on page 10
Checking Amount of Ink Remaining
You can check approximate remaining amount of ink on the operation panel or a computer.
Note
Even when the printer is low on ink, you can print until you are prompted to replace the ink pack.
Replace the ink pack as necessary.
How to Replace the Ink Packs
Viewing How to Replace the Ink Packs on the Operation Panel
? (Help) – How To... – Ink Pack(s) Replacement
e
procedure below is for replacing the BK ink pack. Follow the same procedure for replacing the other color ink
packs.
c
Important
❏ When replacing the black ink pack, make sure to replace with a pack of the same type of black ink.
The printer does not work if you install a pack of dierent type of black ink.
❏ Shake the new ink pack well as instructed before installing it.
A
Open the ink cover.
B
Remove the ink pack tray with both hands.
c
Important
Do not forcibly squeeze the ink packs, as the ink could spill.
CW-C8000 Series User's Guide
Basic Operation
32