Loading and Replacing Paper
is section describes how to load and replace paper. e procedure for replacing paper varies depending on
whether the paper is fed from inside or outside the printer.
Feeding paper from Inside (Internal Roll) Feeding paper from Outside (Rear Feed)
Paper is fed from inside the printer. Set roll paper into the
printer.
U “Loading Roll Paper” on page 45
Paper is fed from outside the printer. Place fanfold paper on
the right side of the printer.
U “Loading Fanfold Paper” on page 50
Note
❏ To feed roll paper from outside the printer, prepare an external paper feeder by yourself. For more
details, contact qualied service personnel for advice.
❏ If you want to wind up printed roll paper, please prepare the optional rewinder (TU-RC8000). For
instructions on how to use the rewinder, see the section below.
U “Rewinder” on page 97
❏ When replacing paper with a dierent shape, form, or type of paper, change the paper settings
either from the operation panel or on the printer driver before loading the paper.
U “Checking the Printer Status on the Printer Screen” on page 28
U “Printer Driver Settings” on page 39
CW-C8000 Series User's Guide
Basic Operation
44