Single sheets
See also “Multipart forms” on page 130 for detailed information on the specification for single sheet
multipart forms.
Width 90 to 420 mm (3.5 to 16.5 inches)/100 to 420 mm (3.9 to 16.5
inches)*
* When loading single sheets and single sheet multipart
forms that are glued at the top of the form from the
cut-sheet feeder or automatic sheet alignment unit
Length 80 to 420 mm (3.15 to 16.5 inches)/92 to 420 mm (3.6 to 16.5
inches)*
* When loading single sheets and single sheet multipart
forms that are glued at the top of the form from the
cut-sheet feeder
Thickness
single sheets
multipart forms
0.065 to 0.19 mm (0.0025 to 0.0074 inch)
0.12 to 0.62 mm (0.0047 to 0.024 inch)
Weight
single sheets
multipart forms
52.3 to 157 g/m² (14 to 42 lb)
40 to 58 g/m² (10 to 15 lb)
Quality
single sheets Plain paper and recycled paper
multipart forms Carbonless multipart forms with a line of glue at the top or
the side of the form
Copies 1 original + 7 copies
Continuous paper
See also “Multipart forms” on page 130 for detailed information on the specifications for continuous
multipart forms.
DLQ-3500II/DLQ-3500IIN User’s Guide
Product Information 127
To Next Page
Loading...
