1. After the printer finishes printing your document, check that the printing finish screen is
displayed. See “Printing Finish Screen on Continuous Paper” on page 21.
2. Press the OK button. The printer advances the paper to the tear off edge.
Note:
If your paper’s perforation is not properly aligned with the tear off edge, you can adjust the tear off
position using u d buttons as described in “Adjusting the tear off position” on page 53.
!
Caution:
Never use the knob to adjust the tear off position; this may damage the printer or cause it to lose
the top of form position.
3. Tear off all printed pages using the tear off edge of the printer cover.
* tear off edge
When you resume printing, the printer feeds the paper back to the top of form position and begins
printing. (You can also manually feed the paper back to the top of form position by pressing the Pause
button.)
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling 43
To Next Page
Loading...
