Advancing paper to the tear off position automatically
To automatically advance your printed documents to the tear off position, turn on the auto tear off
mode and select the appropriate page length for continuous paper in the printer settings. See “Menu
Options for Printer Settings” on page 24 for instructions on how to change the default settings.
When auto tear off is on, the printer automatically advances the paper to the tear off position whenever
it receives a full page of data or a form feed command followed by no more data.
The steps below describe how to use auto tear off.
1. When printing is finished, the printer advances the perforation of the final printed page to the tear
off position.
2. Tear off all printed pages using the tear off edge of the printer cover.
Note:
If your paper’s perforation is not properly aligned with the tear off edge, you can adjust the tear off
position using the u d buttons. See “Adjusting the tear off position” on page 53.
3. When you resume printing, the printer feeds the paper back to the top of form position and begins
printing. (You can also manually feed the paper back to the top of form position by pressing the
Pause button.)
Removing continuous paper
Follow these steps to remove continuous paper from the printer:
1. Press the OK button after the printer finishes printing your document. The printer advances the
paper to the tear off position.
Note:
When the auto tear off function is on, the printer advances the paper perforation to the tear off
position automatically. You can turn on the auto tear off function by changing the default settings.
See “Menu Options for Printer Settings” on page 24 for instructions.
2. Tear off the printed pages.
3. Press the Load/Eject button to feed the continuous paper backward out of the printer and into the
standby position.
4. To completely remove continuous paper from the printer, open the sprocket covers. Remove the
paper from the tractor unit, and then close the sprocket covers.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling 44
To Next Page
Loading...
