Epson DM-D500 - Attaching to DP-502 (TM-H6000 Series; TM-U675)

36
Attaching to DP-502 (TM-H6000 series / TM-U675)
Attach DM-D500 directly to a TM-H6000 series printer or TM-U675 using DP-502. The DM-D500 can be
attached on either side of the TM-H6000 series printer or TM-U675. After attaching, the position of the display
can be moved freely.
Required items
The following items are used to attach DM-D500 to a TM-H6000 series printer or TM-U675. These items are
supplied with DP-502. To connect the TM printer to a computer, a USB or serial cable, a power supply, and an
AC cable are necessary.
Stopper
Fixing screw
for the stopper
Angle fixing screw
Fixing plate B
Fixing plate A
Support B (extension)
Support C
Fixing screws for rubber feet (small)
Rubber feet (small)
Fixing screws for fixing plate B