Epson ds-570w User Manual

9. Li the le side of the separation roller, and then slide and remove the installed separation rollers.
10. Insert the new separation roller axis into the hole on the right side, and then lower the roller.
11. Close the separation roller cover.
c
Important:
Make sure the separation rollers are installed correctly if the cover is hard to close.
12. Close the scanner cover.
13. Plug in the AC adapter, and then turn on the scanner.
14. Reset the scan number using Epson Scan 2 Utility.
Note:
Dispose of the pickup roller and the separation roller following the rules and regulations of your local authority. Do not
disassemble them.
Related Information
& “Roller Assembly Kit Codes” on page 17
Resetting the Number of Scans
Reset the number of scans using Epson Scan 2 Utility aer replacing the Roller Assembly Kit.
User's Guide
Maintenance
100

Epson ds-570w Specifications

General

Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Supported Operating Systems	Windows, Mac OS
Image Sensor	CIS (Contact Image Sensor)
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	35 ppm / 70 ipm
Scan Speed (Black & White, A4, 300 dpi)	35 ppm / 70 ipm
Scanner Type	Sheetfed
Connectivity	Wi-Fi
Scan Speed	35 ppm
Scan to	Email, Cloud, USB
Scanning Method	Duplex
Interface	USB 3.0, Wi-Fi Direct
Daily Duty Cycle	4, 000 pages
Maximum Document Size	8.5 x 240 inches